Neptune Wav Pump

WAV Single Pump

Power supply not included. Use as an add-on for the Apex NG System or the WAV starter kit.

  • Extreme flow (~4000+ gph)
  • Compact size (less total mass compared to nearly all similar flow pumps)
  • Directional flow (pivots with 40 degree range of motion and can be rotated great for rear wall use)
  • Safe, 24V DC operation
  • Low power consumption <35W at the wall
  • Multiple operational modes (random flow modes, mirror, inverse, etc.)
  • Easy to clean (pump automatically shuts off when removed from water)
  • Incredibly Quiet (possibly the quietest driver on the market)
  • Magnetic mount works on up to 1″ glass (in a class by itself)
  • Easy installation with just a single skinny wire for all power and control (1LINK interface makes it a snap!)

WAV2.jpg

Directional flow allows stealth mounting options

Unfortunately, some of the leading water moving pumps on the market only send flow in a direction perpendicular to the glass. This really limits an aquarists options and, in some cases, obstructs the view. Having a power head that can be pointed in all directions is nothing new, but the hardware to make that happen usually takes up too much space and is unsightly. The WAV answers both of these problems with a new take on an articulating mount.

Through research we found that most customers usually never need to point their pump at extreme angles usually 20 degrees one direction or another is enough. This is the approach we took with the WAV. With its innovative, low-profile magnetic mount, you get up 40 degree range of motion on the pivot and then the entire pump rotates 360 degrees. This provides so many more options than flow that coming straight out from the side or back of the aquarium. Imagine mounting the WAV on the back side glass or even the back wall, set an angle, and kicking the flow off the side or front glass. You get the flow where you need it and you stop blocking the beautiful side views o fyour aquarium!

WAV3.jpg

Endless flow options for every aquarist

We know that everyone likes their flow a little bit different. So Apex Fusion controls the WAV with a multitude of patterned flow and random settings. You can even set one or more pumps to mirror or be the inverse of another. The easy to use Apex Fusion scheduling graph makes it a snap to set up huge waves in the morning, stir up detritus in the afternoon, and slow the flow at night. The flow in your aquarium can be as unique as your favorite coral!

WAV4.jpg

Detailed, real-time pump status and AI

This is a first for this product segment. From within Apex Fusion, the details of operation of every WAV on your tank can be observed. You will be able to see the mode, the RPM, the temperature range, and the current status of the pump. Apex Fusion takes this one step further. It monitors your pump parameters, and then based on its AI it takes corrective action such as stopping the pump and sending alerts to you by text or email when the pump is malfunctioning.

Snails, Falls, Stalls No Worries!

Snails and other obstructions are usually a power head’s worst enemy tearing it to pieces. Sometimes just knocking a pump off of the glass will not only kick up sand all over the tank, but it can also destroy the pump, or worse your favorite corals. Most pumps cannot even tell when they are out of water cavitating furiously when doing a simple water change or spinning themselves to ruin. The WAV has advanced sensors that dramatically reduce these events from occurring. Even taking the pump out of water for a cleaning does not require it to be powered down it senses the condition and turns off!

Quiet Operation

Some of today’s most popular water moving pumps are anything but quiet. In fact, the ramping and pulsing sounds can even resonate into solid floors and be heard in other rooms. We have tested many pumps in our lab and the WAV has one of the quietest driver systems on the market today.

WAV5.jpg

WAV6.jpg

 

FLO A new measurement for your aquarium

The key to keeping a great aquarium is understanding what is going on inside, observing when things go well or badly, and then trying to understand the relationship between what you did, what you measured, and what happened.

For years we have used things like Temperature, pH, ORP, Salinity, etc. to understand the best working parameters for our individual aquariums. We all know there is no magic formula but we need this data to make decisions. We even look at the data to compare to past months or to compare to a fellow aquarist.

Light and Flow The two most importan tneeds of a successful reef aquarium

Most recently a new measurement has been getting more and more traction in the reef keeping world PAR (measurement of lighting intensity). With PAR we are able to look back to see how the light affected our aquariums, how it is lit now, and how we compare to our friends lighting set up. We even have a product to measure and log this with your APEX  PAR Monitoring Kit.

But what about Flow? Well known and successful aquarists worldwide often say that two of the key components to a great reef aquarium are lighting and flow. Until now there has not been a real-time method to understand the relative output of all the flow making devices (powerheads/wavemakers) in your aquarium.

This understanding is here withthe WAV and Apex Fusion. Since the WAV constantly communicates with Apex Fusion, it knows exactly how much flow it is producing and logs a new measurement standard we simply call FLO. On top of this, all the WAVs in your aquarium are aggregated giving you an overall FLO for your aquarium. Now you use this number to compare to others that use the WAV in their aquarium or simply compare to your own history of FLO in your aquarium.

Leave a Reply

Your email address will not be published. Required fields are marked *